SmokeHouse Using Manual ZXL-500 2 parts
4. The production technology introduction
(1). Drying: open the oven and heat it up, with the fan operating at a high speed, air inlet valve half-open or full-open, air exhaust valve half-open, switch off the oven and air exhaust valve while reaching the set temperature.
(2). Cooking: open the oven and heat it up, at the same time, open steam generator, with the fan running at a low speed, when temperature is lower than the setting valve, the air exhaust valve is half-open or half-closed, when the temperature reaches the setting value, close the oven, with the air exhaust valve half-open. Steam inlet mode has time control and humidity control. On time control mode, according to the steam stop time and the steam inlet time set in the "auxiliary parameter"screen, steam stop and steam inlet will move in cycles when the oven temperature does not reach the set value, it will close the steam inlet valve when reaching the set value.